BPWKK - DEX-O-TEX P-261 PASTE
- MSDS: BPWKK
- Manufacturer: CROSSFIELD PRODUCTS CORP
- Product Name: DEX-O-TEX P-261 PASTE
- National Stock Number: 8030-00N034695
Product Identification
Product ID:DEX-O-TEX P-261 PASTE
MSDS Date:10/25/1985
FSC:8030
NIIN:00N034695
MSDS Number: BPWKK
Responsible Party
COMPTON, CA 90221
US
Emergency Phone: 213-636-0561
Info Phone: 213-636-0561
Cage: 60782
Contractor
Telephone: 310-886-9100
Cage: 60782
Ingredients
ACRYLIC POLYMER
CAS: 25608-63-7
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRITATION AND SKIN
RASH. CHRONIC: NOT KNOWN - MATERIAL SHOULD NOT HAVE ANY CHRONIC
AFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.
First Aid
First Aid:INHAL: MOVE SUBJECT TO FRESH AIR IF NEEDED. EYES: FLUSH WITH
WATER - CALL PHYSICIAN IF IRRITATION REMAINS. SKIN: WASH WITH SOAP
AND WATER. REMOVE CONTAMINATED CLOTHING. INGEST: INDUCE VOMITING
AND CAL L PHYSICIAN.
Fire Fighting
Extinguishing Media:DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER IF HEATED ABOVE
212F. POLYMER FILM CAN BURN.
Accidental Release
Spill Release Procedures:COAGULATE MATERIAL BY ADDING FERRIC CHLORIDE
AND LIME. FLUSH WITH WATER OR USE SAND TO ABSORB MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL PLACE. AVOID FREEZING.
DO NOT HEAT ABOVE 200F.
Other Precautions:MATERIAL WILL COAGULATE IF HEATED RAPIDLY. EYE
PROTECTION SHOULD BE WORN.
Exposure Controls
Respiratory Protection:NONE IF GOOD VENTILATION IS MAINTAINED. IF NOT-
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL OR MECHANICAL (GENERAL).
Protective Gloves:CHEMICAL RESISTANT OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:200F,93C
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1.0 (H*2O=1)
Evaporation Rate & Reference:AS WATER
Solubility in Water:COMPLETELY MISCIBLE
Appearance and Odor:MILKY WHITE LIQUID, MILD ACRYLIC ODOR.
Percent Volatiles by Volume:60
Stability
Stability Indicator/Materials to Avoid:YES
AVOID ACIDS - IT WILL CAUSE MATERIAL TO COAGULATE
Stability Condition to Avoid:AVOID FREEZING. DO NOT HEAT >200F.
Disposal
Waste Disposal Methods:SANITARY LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.